Zipper Jig
This listing is for 1 zipper jig.
If you struggle to put on your zipper pulls, this tool is for you! 3D printed FOLDABLE zipper jig!
Folds flat for easy storage, and the arm locks in place during use! If you find it slips around on your work surface you can use some sticky tack, tape or rubber dots to hold it in place. Has tapered tines to fit a wide assortment of pulls.
View our install video here.
How to Use:
Prep - Unfold and lock the arm into place. Place the jig on your work surface.
Step 1 - Install the pull facing away from you.
Step 2 - Align the zipper tapes at 45 degree angle
Step 3 - Gently pull on both zipper pieces.
Step 4 - Remove your zipper from the jig and done.
Measures 95 mm by 50 mm and only 5 mm thick.
This listing is for 1 zipper jig.
If you struggle to put on your zipper pulls, this tool is for you! 3D printed FOLDABLE zipper jig!
Folds flat for easy storage, and the arm locks in place during use! If you find it slips around on your work surface you can use some sticky tack, tape or rubber dots to hold it in place. Has tapered tines to fit a wide assortment of pulls.
View our install video here.
How to Use:
Prep - Unfold and lock the arm into place. Place the jig on your work surface.
Step 1 - Install the pull facing away from you.
Step 2 - Align the zipper tapes at 45 degree angle
Step 3 - Gently pull on both zipper pieces.
Step 4 - Remove your zipper from the jig and done.
Measures 95 mm by 50 mm and only 5 mm thick.
This listing is for 1 zipper jig.
If you struggle to put on your zipper pulls, this tool is for you! 3D printed FOLDABLE zipper jig!
Folds flat for easy storage, and the arm locks in place during use! If you find it slips around on your work surface you can use some sticky tack, tape or rubber dots to hold it in place. Has tapered tines to fit a wide assortment of pulls.
View our install video here.
How to Use:
Prep - Unfold and lock the arm into place. Place the jig on your work surface.
Step 1 - Install the pull facing away from you.
Step 2 - Align the zipper tapes at 45 degree angle
Step 3 - Gently pull on both zipper pieces.
Step 4 - Remove your zipper from the jig and done.
Measures 95 mm by 50 mm and only 5 mm thick.